Richmond Professional Landscaping builds garden walls across Richmond upon Thames for commercial sites, rental properties and family homes. Garden wall construction here covers new freestanding walls, boundary and dividing walls, raised planters, retaining walls, full rebuilds and repairs or repointing on older brickwork.
Every wall is only as good as what lies beneath it. Concrete strip footings set into firm subsoil, the right bond pattern and frost-resistant brick, block or natural stone keep it standing straight for decades, while copings shed rain away from the joints. Where a wall holds back soil, weep holes and free-draining backfill relieve the water pressure behind it.
RHS Level 3 qualified and BALI accredited, the company brings 29 years of hard landscaping experience and more than 930 completed projects to every course of brick. Taller walls are checked by a structural engineer, and every quote is itemised so the cost of footings, masonry and coping is clear from the first visit.

A freestanding wall in brick, block or stone frames a garden in a way few other features do. New garden wall construction starts with concrete footings sized for the height and the ground beneath.
Bricks are laid in a proper bond, with neat mortar joints and straight courses throughout. We finish every wall with a coping or capping to keep rain out of the top.
A solid boundary wall gives privacy and security for decades, with far less upkeep than garden fencing. Garden boundary and dividing walls also split larger plots into separate areas.
Brick and block give a crisp, uniform finish, while reclaimed stock bricks or natural stone suit older properties. Our bricklayers confirm the boundary line with you before the first trench is dug.


Low walls around beds, terraces and seating areas add structure and a handy perch on summer evenings. Decorative and raised garden walls also make planting easier on the back, especially for keen gardeners.
Raised planters hold back wet soil, so they need drainage holes and a waterproof lining inside. We finish them with contrasting copings or recessed joints for a crisp, considered look.
Holding back a bank of soil puts far more strain on a wall than standing on its own. Garden retaining wall construction accounts for that pressure with deeper footings, thicker masonry and drainage.
Weep holes, perforated pipe and gravel backfill stop water building up behind the wall, especially on clay. Richmond Professional Landscaping brings in a structural engineer for walls over about a metre high.


Leaning walls, wide cracks and crumbling brickwork usually point to failed foundations or years of frost damage. Garden wall replacement and rebuilding starts by deciding which sections are worth saving.
Sound bricks are cleaned and reused where possible, so the rebuilt section blends with what remains. Our crew lays new footings first whenever the old ones have moved.
Crumbling mortar, loose copings and spalled bricks are common on older garden walls around the borough. Garden wall repairs and refurbishment fix those problems before they turn into a full rebuild.
Repointing with lime mortar suits older brickwork, while modern walls take a cement-based mix. We also replace damaged bricks with close matches, so repairs blend in neatly.


Richmond Professional Landscaping inspects the wall position, ground conditions, underground services and access first. The purpose of the wall is agreed at the same visit, along with any need for structural calculations.
Dimensions, materials, bond pattern, mortar and coping are confirmed in a written plan. Our crew also arranges deliveries, access and removal of excavated soil.
The trench is dug to firm subsoil and filled with concrete, with reinforcement where specified. Footings on clay or near trees go deeper to resist movement. We leave the footing to cure fully before the first course is laid.
Courses are laid level and true, with consistent joints from bottom to top. On retaining walls, we add free-draining backfill, weep holes and pipework as the wall rises.
We point the joints, fit the coping and check the finished wall for alignment and defects. All debris is cleared away, and simple care advice is shared at handover.
Garden walls are priced by the square metre of wall face, so height matters as much as length. A 10 metre brick wall around 1 metre high typically costs £1,500 to £3,000 across the UK, with London prices often 20 to 30% higher. Natural stone and retaining walls sit at the top of the range.
Service Type
| Typical Cost (per m² of wall face) | What We Include
|
|---|---|---|
Single-skin brick wall | £90 to £140 per m² | Half a brick thick with piers for stability, ideal for low walls and planter edges. |
Double-skin brick wall | £150 to £220 per m² | One brick thick for taller boundaries, with deeper footings, wall ties and coping. |
Rendered block wall | £120 to £180 per m² | Concrete block walls finished in smooth or textured render, a good match for modern homes. |
Natural stone wall | £180 to £300 per m² | Hand-laid sandstone, limestone or flint for period properties and conservation areas. |
Reinforcement, drainage behind retaining walls and skip hire are priced on top where needed. Richmond Professional Landscaping lists excavation, footings, masonry, coping and waste removal separately in every written quote.
Call Richmond Professional Landscaping today to arrange a free site visit and an itemised garden wall quote. Bricks, stone and coping are matched to the property at the same visit.
We build boundary walls, retaining walls, raised planters and decorative garden walls in brick, block and natural stone. Single-skin brick walls typically start from around £90 per square metre, rising to £300 or more for natural stone. Rendered block walls sit in between, from around £120 per square metre.
Frost-resistant facing bricks suit most freestanding walls, while engineering bricks are used below ground and on retaining walls. Reclaimed stock bricks are a good match for Victorian and Edwardian homes. Matching the mortar colour matters just as much as the brick itself.
Most garden walls sit on a concrete strip footing set into firm subsoil, often at least 450 millimetres deep. Clay soils, nearby trees and taller walls call for deeper and wider footings. The footing is usually 2 to 3 times wider than the wall it supports.
Yes, water building up behind the wall is the main cause of retaining wall failure. Weep holes, perforated pipe and gravel backfill let it escape before pressure builds. Gravel backfill also stops the soil behind the wall turning into a heavy, wet mass.
It depends. Walls up to 2 metres high usually fall under permitted development, or 1 metre next to a road used by vehicles. Listed buildings and conservation areas have extra rules, which are checked before work starts. Walls on a shared boundary may also need a party wall notice to the neighbour.
A simple 10 metre brick wall usually takes 3 to 5 working days, including footings and coping. Retaining walls and natural stone take longer, as each course is laid and left to set. Work pauses in very cold or wet weather, as mortar needs to cure properly.